Hello, I have a brand new Nano+ drone but I struggle to use it and wonder if it is defective or if there is something I can do. Could someone help please ?
The first thing I did was to upgrade the firmware. The app now shows :
Aircraft firmware : latest v1.4.9
> flight control : v0.0.5.48
> esc : v2.0.0.18
> remote controller : v1.0.4.5
> gimbal : v1.0.2.18
> battery : v1.3.12.0
App version : v1.4.26
1/ When I use the gimbal control behind the controller I see a message "gimbal is self checking please wait". The gimbal dosn't move.
The drone shows a yellow blinking light. I tried the 'gimbal calibration' step, it seems to work fine, the gimbal move, etc... But after that it's still impossible to control the gimbal.
2/ I can still make the drone takeoff with the "slide to takeoff" button on my phone.
Then if I push the left controller up to move the drone up : it works.
If I push the left controller down to move the drone down : nothing happen. Same for the right controller.
I make the drone land with the "slide to land" button on my phone.
Does anyone knows what is going on ?
The first thing I did was to upgrade the firmware. The app now shows :
Aircraft firmware : latest v1.4.9
> flight control : v0.0.5.48
> esc : v2.0.0.18
> remote controller : v1.0.4.5
> gimbal : v1.0.2.18
> battery : v1.3.12.0
App version : v1.4.26
1/ When I use the gimbal control behind the controller I see a message "gimbal is self checking please wait". The gimbal dosn't move.
The drone shows a yellow blinking light. I tried the 'gimbal calibration' step, it seems to work fine, the gimbal move, etc... But after that it's still impossible to control the gimbal.
2/ I can still make the drone takeoff with the "slide to takeoff" button on my phone.
Then if I push the left controller up to move the drone up : it works.
If I push the left controller down to move the drone down : nothing happen. Same for the right controller.
I make the drone land with the "slide to land" button on my phone.
Does anyone knows what is going on ?