Hi guys,
I explane my experience upgrading the fw of my V2
the upgrade FW of the EVO, by MicroSD card, is the same of the V1, BUT it requires about 30 minutes to ends.
Be sure to have drone and aircraft fully charged.
During the process, the FW update take a very long time; when it reach 80% it seems locked, the drone start playing the boot sound), and also battery leds (the 2 leds in the middle) start blinking.
IT IS ALL NORMAL.
Take your time and wait!
Remember that If you have more than one battery (the battery fw module has been updated to 0.0.16.0) you must repeat the upgrade for each one
I explane my experience upgrading the fw of my V2
the upgrade FW of the EVO, by MicroSD card, is the same of the V1, BUT it requires about 30 minutes to ends.
Be sure to have drone and aircraft fully charged.
During the process, the FW update take a very long time; when it reach 80% it seems locked, the drone start playing the boot sound), and also battery leds (the 2 leds in the middle) start blinking.
IT IS ALL NORMAL.
Take your time and wait!
Remember that If you have more than one battery (the battery fw module has been updated to 0.0.16.0) you must repeat the upgrade for each one
Last edited: